WRAPTECH LEARN
Wrap Installation Guide
Everything you need to prepare, apply and finish your WrapTech DIY project.
GETTING STARTED
Before you begin
Prepare your vehicle and workspace before beginning your installation.
01
Prepare the surface
Make sure the installation surface is thoroughly cleaned before continuing.
02
Measure
Check the area you’re covering and make sure the film or wrap is sized correctly before application.
03
Position
Place the material carefully and align it before committing to the final placement.
04
Apply
Work gradually across the surface, using the proper application method for the product.
05
Smooth
Remove air, water, wrinkles, and excess tension as you work.
06
Shape
Carefully conform the material around curves, edges, corners, and contours where required.
07
Trim
Cut away excess material and finish around edges for a clean, professional appearance.
08
Secure
Check edges, corners, and high-tension areas to make sure everything is properly bonded and finished.
09
Inspect
Look over the entire installation for bubbles, lifting, creases, gaps, or areas that need adjustment.
10
Finish & Care
Allow the material to settle and follow the recommended aftercare before washing, cleaning, or exposing it to heavy use.
PRO TIP
Take your time during installation and work in manageable sections.
WATCH & LEARN
Watch the installation
Ready to start your project?
Shop the products and tools you need to complete your next DIY project.